Rolled hems

Last week I made some knit skirts and used rolled hems on the bottom, which gave a nice wavy finish!

I had intended to use the rolled edge setting on my overlocker (serger) but was having problems getting my overlocker to work (later discovered I needed to change the needle!)

Anyway - since I couldn't do the rolled edge on my overlocker, I decided to try using the rolled hem foot on my sewing machine.

I found it was actually quite easy to use! Here's how:

You fold the edge of your fabric over twice to form your hem and slide this under the foot:

Then put the needle down into the hem where you want it stitched:

Lower the foot, then holding both threads at the back make 3 or 4 stitches.

Then just gently ease the hem up into the curl of the hemmer foot, and continue stitching and feeding the edge of the fabric through:


This produces a nice, neat, small hem:

If you do exactly the same but with knit fabric, the resulting hem has this nice wavy look:


Now that I have my overlocker working again, I thought I'd compare my sewing machine rolled hem with my overlocked rolled edge.
Here's both on the plain cotton fabric - the overlocked hem at the top, and the sewing machine hem on the bottom:


Then here's the difference with the knit fabric. Again the overlocked edge is at the top and the sewing machine stitched hem at the bottom.

I have to say I prefer the machine stitched rolled hem - particularly with the knit fabric, but it is slightly more fiddly to do with the sewing machine!

Do you have a rolled hem foot for your machine? Do you use it much?

I think that I'm going to try out my other machine feet this week. Having had my machine for about 8 years, I think it's about time I learnt what it can do!
I'll post over the coming days what I learn!

I'll be trying:

Blind Stitch Hemming
Smocking
Pin Tucking
Shell Tuck
Fagoting

How well do you know what your sewing machine can do??


8 comments:

  1. I don't have one... but now I know I want one! :D I haven't used my sewing machine in a while but I really need to make dresses for my little girl.

    ReplyDelete
    Replies
    1. Thanks Janelle! I'm sure your little girl would love some new dresses! My girls never seem to have enough!!

      Delete
  2. I like the wave! I have to admit I haven't broken out my rolled hem foot either. I debated it a couple times this summer actually, this makes me think I really should!
    Rachel

    ReplyDelete
    Replies
    1. You should try your rolled hem foot Rachel! It only took me 8 years to get to mine - but I'll be using it lots from now on!!

      Delete
  3. very very nice skirts! the wave makes it look girly girl! great job :)Anna

    ReplyDelete
  4. Great comparison.... I love what both of my machines can do & use the different feet & stitches all the time!

    ReplyDelete
    Replies
    1. Thanks DeniseAngela - and it's so nice to hear that someone does make use of all the settings on their machines! I'm getting there slowly!

      Delete

Note: Only a member of this blog may post a comment.